Emperador Light Polished Marble Thresholds 4×36

Emperador Light thresholds come at 4×36 in a polished brown marble, 3/4 inch thick, with a bevelled edge. Variation between pieces is recorded as moderate, so two thresholds in the same house will not be identical.

Bevel and depth

A bevelled edge takes the sharpness off the top arris and lets one floor level meet another without a hard line. Polishing deepens the brown and brings out veining, which on this stone runs to a moderate spread. The 3/4 inch section gives enough depth to bridge a small difference in floor build up.

• Bevelled top The eased edge softens the transition where two floors meet.
• Moderate variation Pieces differ noticeably, so choose which face goes where.

Doorways in the house

The rating covers residential interior floors, and kitchen, living room and bathroom are all recorded as rooms. Thresholds are ordered by the piece and cut to the opening, so measure the finished door width rather than the frame. Marble thresholds in this stone belong to a family that includes tiles and several mosaic sheets.

• Cut to the opening Measure the finished width, not the frame, before cutting.
• Three rooms listed Kitchen, living room and bathroom all appear in the record.

Why we chose it

• Bridges levels A 3/4 inch section absorbs a small step between two finishes.
• Matches the range Tiles and mosaics in Emperador Light share the same stone.

Care

Seal after installation and again every one to two years. A threshold sees more grit underfoot than most surfaces, so sweeping before mopping avoids dragging particles across a polished face. Clean with a pH neutral stone product.