Giallo Honed Filled Travertine Thresholds 4×36

Giallo thresholds are cut from travertine at 4×36, honed and filled, 3/4 inch thick with a bevelled edge. Variation between pieces is moderate, so the yellow shifts a little from one to the next.

Honed and filled

Travertine forms with natural voids, and a filled finish means those holes have been closed before honing, giving a surface that is smooth to the hand and even in appearance. The colour group is Giallo, a warm yellow. The bevel takes the edge off the top arris. Style is recorded as classic.

• Filled surface Natural voids are closed before honing, leaving an even face.
• Moderate variation Pieces differ noticeably, so pick which face goes where.

Doorways, home or commercial

The rating covers both residential and commercial interior floors, and kitchen, living room and bathroom are recorded as rooms. Thresholds are ordered by the piece and cut to the finished opening rather than to the frame.

• Commercial rated Commercial interior floors sit in the rating alongside residential.
• Measure the opening Cut to the finished width, not to the frame.

Why we chose it

• Bridges two floors A 3/4 inch section handles a small step between finishes.
• Warm tone Giallo brings yellow rather than the grey most thresholds default to.

Care

Travertine is porous and needs sealing after installation, then resealing every one to two years. Acids etch it, so clean with a pH neutral stone product and keep vinegar and citrus cleaners away.