Sahara Beige Honed Herringbone Marble Mosaics 12 1/8×13 3/8

Sahara Beige herringbone comes as a honed marble mosaic sheet at 12 1/8 by 13 3/8, the bars already set at their angles. Each sheet covers 0.94 square feet, six to a box, and a sample can be ordered before committing to a run.

An angle that has to continue

Herringbone lives or dies on whether the angle carries across the whole area, and a mesh sheet takes most of that risk away by fixing the geometry before it leaves the factory. What remains is lining up the sheets. As beige marble mosaics go this one shows moderate variation, so tone moves from piece to piece. Honing keeps the surface matte and a 2×12 andorra trim runs in the same stone.

• Angle fixed The herringbone is set on the sheet, so only the sheet joins need aligning.
• Andorra trim A 2×12 profile in this stone finishes an edge.

Nearly every interior use

Approvals run across commercial and residential interiors, walls and floors, wet rooms on both surfaces, and backsplashes, with bathroom, kitchen and living room recorded. Thirteen boxes cover 60 square feet including the cutting margin. Sheets need full adhesive behind them, and because tone moves, mixing boxes during setting is worth the extra minute. Sheets should also be dry laid across the area before any adhesive goes down, so the angle can be checked to run true from one side of the room to the other.

• Thirteen boxes 5.64 square feet a box, waste counted, over 60 square feet.
• Mix while setting Moderate variation spreads best when several boxes are open.

Why we chose it

• Geometry pre set The hardest part of a herringbone is already done on the sheet.
• Sample offered Worth using where the stone moves as much as this.
• Broad approval Floors, walls, showers and commercial spaces all appear.

Care

Seal after installation, reseal every one to two years. Acidic products dull the surface on contact, so routine cleaning means a pH neutral stone cleaner and nothing harsher.